Magnetic Iron Oxide Nanoparticles Research Articles

Comparison of MAF-32 and a One-Pot Synthesized Superparamagnetic Iron Oxide/MAF-32 Composite for the Adsorption of Diclofenac

The global presence of pharmaceutical pollutants in water sources represents a burgeoning public health concern. Recent studies underscore the urgency of addressing this class of emerging contaminants. In this context, our work focuses on synthesizing a composite material, FexOy/MAF-32, through a streamlined one-pot reaction process, as an adsorbent for diclofenac, an emerging environmental contaminant frequently found in freshwater environments and linked to potential toxicity towards several organisms such as fish and mussels. A thorough characterization was performed to elucidate the structural composition of the composite. The material presents magnetic properties attributed to its superparamagnetic behavior, which facilitates the recovery efficiency of the composite post-diclofenac adsorption. Our study further involves a comparative analysis between the FexOy/MAF-32 and a non-magnetic counterpart, comprised solely of 2-ethylimidazolate zinc polymer. This comparison aims to discern the relative advantages and disadvantages of incorporating magnetic iron oxide nanoparticles in the contaminant removal process facilitated by a coordination polymer. Our findings reveal that even a minimal incorporation of iron oxide nanoparticles substantially enhanced the composite’s overall performance in pollutant adsorption.

Magnetic iron oxide nanoparticle enhanced microwave pretreatment for anaerobic digestion of meat industry sludge

Our study investigates the effects of iron oxide (Fe3O4) nanoparticles combined microwave pretreatment on the anaerobic digestibility and soluble chemical oxygen demand (SCOD) of meat industry sludge. One of our main objectives was to see whether the different microwave-based pretreatment procedures can enhance biogas production by improving the biological availability of organic compounds. Results demonstrated that combining microwave irradiation with magnetic iron oxide nanoparticles considerably increased SCOD (enhancement ratio was above 1.5), the rate of specific biogas production, and the total cumulative specific biogas volume (more than a threefold increment), while having no negative effect on the biomethane content. Furthermore, the assessment of the sludge samples’ dielectric properties (dielectric constant and loss factor measured at the frequency of 500 MHz) showed a strong correlation with SCOD changes (r = 0.9942, R2 = 0.99), offering a novel method to evaluate pretreatment efficiency.

Facile Fabrication and Characterization of Amine-Functional Silica Coated Magnetic Iron Oxide Nanoparticles for Aqueous Carbon Dioxide Adsorption

Facile Fabrication and Characterization of Amine-Functional Silica Coated Magnetic Iron Oxide Nanoparticles for Aqueous Carbon Dioxide Adsorption

Optimization of Cyanocobalamin (Vitamin B12) Sorption onto Mesoporous Superparamagnetic Iron Oxide Nanoparticles.

The techniques used to detect and quantify cyanocobalamin (vitamin B12) vary considerably in terms of detection sensitivity, from the most sensitive, based on radioisotopes and mass spectrometry (MS) with limits of detection (LOD) in fg mL-1, to fluorescence (FL) and surface plasmon resonance (SPR) biosensors with LOD values in the range of a few µg mL-1. For accurate quantification of an analyte present at trace levels in complex biological matrices, a selective separation and enrichment step is required to overcome matrix interferences and ensure sufficient detection sensitivity. In this study, iron oxide magnetic nanoparticles (IONPs) were used for the extraction and initial preconcentration of cyanocobalamin (vitamin B12). In the dependence of the magnetization on the H-field (hysteresis loop), no coercivity and remanence values were found at 300 K, indicating the superparamagnetic properties of the tested IONPs. Perfluorinated acids were used as amphiphilic agents to allow the sorption of cyanocobalamin onto the IONPs. FT-IR/ATR spectroscopy was used to confirm the sorption of cyanocobalamin on the IONPs. The influence of the addition of a homologous series of perfluorinated acids such as trifluoroacetic acid (TFAA), heptafluorobutyric acid (HFBA), and trichloroacetic acid (TCAA) to the extraction mixture was tested considering their type, mass, and time required for effective sorption. The adsorption kinetics and isotherm, described by the Freundlich and Langmuir equations, were analyzed. The maximum adsorption capacity (qm) exceeded 6 mg g-1 and was 8.9 mg g-1 and 7.7 mg g-1 for HFBA and TCAA, respectively, as the most efficient additives. After the desorption process using aqueous KH2PO4 solution, the sample was finally analyzed spectrophotometrically and chromatographically. The IONP-based method was successfully applied for the isolation of cyanocobalamin from human urine samples. The results showed that the developed approach is simple, cheap, accurate, and efficient for the determination of traces of cyanocobalamin in biological matrices.

Polypyrrole Coating via Lemieux-von Rudloff Oxidation on Magnetite Nanoparticles for Highly Efficient Removal of Chromium(VI) from Wastewater.

An alternative way for the coating of polypyrrole (PPy) polymer on hydrophobic magnetite (Fe3O4) nanoparticles is reported here to capture toxic chromium ions, Cr (VI), present in water. Iron oxide magnetic nanoparticles (Fe3O4) were synthesized by the conventional coprecipitation technique using FeCl3·6H2O and FeSO4·7H2O iron precursors and subsequently modified with oleic acid (OA). Then OA-Fe3O4 hydrophobic nanoparticles were oxidized using the Lemieux-von Rudloff reaction to transfer OA into hydrophilic azelaic acid (AA) (HOOC(CH2)7COOH-modified magnetic nanoparticles (AA-Fe3O4). Finally, a PPy polymer coating was formed by a seeded polymerization of pyrrole, using AA-Fe3O4 as seeds. The average size of PPy/Fe3O4 nanocomposites is 12.33 nm and is almost spherical in shape. The surface composition is confirmed by FTIR and thermogravimetry analyses. An X-ray diffraction study confirmed the formation of highly crystalline Fe3O4 nanoparticles, and the crystallinity was retained after the surface modification. The adsorption study suggested that the Cr(VI) ion adsorption is highly pH-dependent and the maximum amount of adsorption is obtained at pH 2.0. The adsorption results revealed that the Langmuir model provided the best fit for the isotherm, with a maximum adsorption capacity reaching approximately 173.22 mg g-1 at 323 K. Spontaneous and endothermic adsorption processes were confirmed by evaluating the thermodynamic parameters obtained in this investigation. The kinetics study showed that the interaction between Cr(VI) ions and magnetic nanocomposites was directed by a pseudo-second-order rate process indicating chemisorption. The prepared PPy/Fe3O4 nanocomposites would be promising adsorbents to purify water by eliminating Cr(VI) metal ions from wastewater.

Iron Oxide Nanoparticles: Selectively Targeting Melanoma Cells In Vitro by Inducing DNA Damage via H2AX Phosphorylation and Hindering Proliferation through ERK Dephosphorylation.

This study investigates the distinctive characteristics of iron oxide magnetic nanoparticles (mNPs) and their potential application in cancer therapy, focusing on melanoma. Three types of mNPs, pre-validated for safety, underwent molecular analysis to uncover the activated signaling pathways in melanoma cells. Using the Western blot technique, the study revealed that mNPs induce cytotoxicity, hinder proliferation through ERK1/2 dephosphorylation, and prompt proapoptotic effects, including DNA damage by inducing H2AX phosphorylation. Additionally, in vitro magnetic hyperthermia notably enhanced cellular damage in melanoma cells. Moreover, the quantification of intracellular iron levels through Inductively Coupled Plasma Mass Spectrometry (ICP-MS) analysis unveils the precise dosage required to induce cellular damage effectively. These compelling findings not only shed light on the therapeutic potential of mNPs in melanoma treatment but also open exciting avenues for future research, heralding a new era in the development of targeted and effective cancer therapies. Indeed, by discerning the effective dose, our approach becomes instrumental in optimizing the therapeutic utilization of iron oxide magnetic nanoparticles, enabling the induction of precisely targeted and controlled cellular responses.

Effects of foliar iron oxide nanoparticles (Fe3O4) application on photosynthetic parameters, distribution of mineral elements, magnetic behaviour, and photosynthetic genes in tomato (Solanum lycopersicum var. cerasiforme) plants

This study aims to examine the effect of foliar magnetic iron oxide (Fe3O4) nanoparticles (IONP) application on the physiology, photosynthetic parameters, magnetic character, and mineral element distribution of cherry tomatoes (Solanum lycopersicum var. cerasiforme). The IONP suspension (500 mg L−1) was sprayed once (S1), twice (S2), thrice (S3), and four times (S4) a week on seedlings. Upon 21 days of the treatments, photosynthetic parameters (chlorophyll, carotenoids, photosynthetic yield, electron transport rate) were elucidated. Inductively-coupled plasma-optical emission spectrometer (ICP-OES) and vibrating sample magnetometer (VSM) were used to determine the mineral elements and abundance of magnetic power in the seedlings. In addition, the RT-qPCR method was performed to quantify the expressions of photosystem-related (PsaC, PsbP6, and PsbQ) and ferritin-coding (Fer-1 and Fer-2) genes. Results revealed that the physiological and photosynthetic indices were improved upon S1 treatment. The optimal dosage of IONP spraying enhances chlorophyll, carotenoid, electron transport rate (ETR), and effective photochemical quantum yield of photosystem II (Y(II)) but substantially diminishes non-photochemical quenching (NPQ). However, frequent IONP applications (S2, S3, and S4) caused growth retardation and suppressed the photosynthetic parameters, suggesting a toxic effect of IONP in recurrent treatments. Fer-1 and Fer-2 expressions were strikingly increased by IONP applications, suggesting an attempt to neutralize the excess amount of Fe ions by ferritin. Nevertheless, frequent IONP treatment fluctuated the mineral distribution and caused growth inhibition. Although low-repeat foliar applications of IONP (S1 in this study) may help improve plant growth, consecutive applications (S2, S3, and S4) should be avoided.

A hollow magnetic soft robot consisting of rod-shaped nanofiber actuators

Magnetic soft robots are prominent in biological environments due to the untethered movement and penetration under magnetic field. Moreover, in order to overcome biological barriers in microenvironment, the development of small size, biocompatible/biodegradable and precisely controlled mobility of magnetic soft robots is a promising. Thus, a hollow magnetic soft robot consisting of rod-shaped nanoactuators formed by the cleavage of photosensitive electrospun nanofibers is designed. The nanofiber actuators are composed of biodegradable polymer matrix and biocompatible superparamagnetic magnetic iron oxide nanoparticle fillers, and the uniform rod-shaped nanofibers are obtained from the molecule fracture of photosensitive copolymers under UV irradiation. Based on the bottom-up and top-down constructing concept, the hollow magnetic soft robots show unique property of the stabilized morphology, the programmed magnetization and the high order motion transition in an instant. This provides a strategy for designing and obtaining the adaptive magnetic soft robots, which can effectively improve the precise locomotion and fast movement efficiency in complex physiological environment.

In vivo assessment of the toxic impact of exposure to magnetic iron oxide nanoparticles (IONPs) using Drosophila melanogaster

Iron oxide nanoparticles (IONPs) have useful properties, such as strong magnetism and compatibility with living organisms which is preferable for medical applications such as drug delivery and imaging. However, increasing use of these materials, especially in medicine, has raised concerns regarding potential risks to human health. In this study, IONPs were coated with silicon dioxide (SiO2), citric acid (CA), and polyethylenimine (PEI) to enhance their dispersion and biocompatibility. Both coated and uncoated IONPs were assessed for genotoxic effects on Drosophila melanogaster. Results showed that uncoated IONPs induced genotoxic effects, including mutations and recombinations, while the coated IONPs demonstrated reduced or negligible genotoxicity. Additionally, bioinformatic analyses highlighted potential implications of induced recombination in various cancer types, underscoring the importance of understanding nanoparticle-induced genomic instability. This study highlights the importance of nanoparticle coatings in reducing potential genotoxic effects and emphasizes the necessity for comprehensive toxicity assessments in nanomaterial research.

Menthol Conjugated Magnetic Iron Oxide Nanoparticles Induce Apoptosis and Increase Caspase-8 Gene Expression in Gastric Cancer Cell Line

Menthol Conjugated Magnetic Iron Oxide Nanoparticles Induce Apoptosis and Increase Caspase-8 Gene Expression in Gastric Cancer Cell Line

Enhanced Biocompatibility by Evaluating the Cytotoxic and Genotoxic Effects of Magnetic Iron Oxide Nanoparticles and Chitosan on Hepatocellular Carcinoma Cells (HCC).

Hepatocellular carcinoma (HCC), the fifth most prevalent cancer worldwide, is influenced by a myriad of clinic-pathological factors, including viral infections and genetic abnormalities. This study delineates the synthesis, characterization, and the biological efficacy of iron oxide nanoparticles (Fe3O4) and chitosan-coated iron oxide nanoparticles (Fe3O4-CS) against HCC. Analytical methods confirmed the successful synthesis of both nanoparticles, with Fe3O4-CS demonstrating a smaller, uniform spherical morphology and distinct surface and magnetic properties attributable to its chitosan coating. The prepared materials were analyzed using various techniques, and their potential cytotoxic effects on HepG2 cancer cells line for HCC were investigated. In biological evaluations against HepG2 cells, a notable distinction in cytotoxicity was observed. Fe3O4 showed modest anticancer activity with an IC50 of 383.71 ± 23.9 µg/mL, whereas Fe3O4 exhibited a significantly enhanced cytotoxic effect, with a much lower IC50 of 39.15 ± 39.2 µg/mL. The Comet assay further evidenced Fe3O4-CS potent DNA damaging effect, showcasing its superior ability to induce apoptosis through extensive DNA fragmentation. Biochemical analyses integrated into our results reveal that Fe3O4-CS not only induces significant DNA damage but also markedly alters oxidative stress markers. Compared to control and Fe3O4-treated cells, Fe3O4-CS exposure significantly elevated levels of oxidative stress markers: superoxide dismutase (SOD) increased to 192.07 U/ml, catalase (CAT) decreased to 0.03 U/L, glutathione peroxidase (GPx) rose dramatically to 18.76 U/gT, and malondialdehyde (MDA) levels heightened to 30.33 nmol/gT. These results underscore the potential of Fe3O4-CS nanoparticles not only in inducing significant DNA damage conducive to cancer cell apoptosis but also in altering enzymatic activities and oxidative stress markers, suggesting a dual mechanism of action that may underpin their therapeutic advantage in cancer treatment. Our findings advocate for the further exploration of Fe3O4-CS nanoparticles in the development of anticancer drugs, emphasizing their capability to trigger oxidative stress and enhance antioxidant defense mechanisms.

Lychee peel extract-based magnetic iron oxide nanoparticles: Sustainable synthesis, multifaceted antioxidant system, and prowess in eco-friendly food preservation

The quest for sustainable synthesis methods has led to the exploration of lychee peel extract (LCPEx) as an eco-friendly alternative in the field of nanomaterials. This groundbreaking study introduces the synthesis of lychee peel extract-based magnetic iron oxide nanoparticles (LCPEx-MIONPs) and delves into their diverse applications. The meticulous methodology involved a multistep process for lychee peel extraction, resulting in the creation of LCPEx. The subsequent synthesis of LCPEx-MIONPs, achieved by combining the extract with iron chloride as a precursor and sodium hydroxide as a pH adjustor (set to 7.5), yielded nanoparticles with nanoscale dimensions (8.7± 0.4 nm) and diverse morphologies (cubic, hexagonal, spherical). Comprehensive characterization techniques, including Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), unveiled the structural attributes of LCPEx-MIONPs. The LCPEx exhibited robust antioxidant activity against DPPH, reaching its maximum inhibitory within only 5 minutes in a simple disc diffusion. The multifaceted antioxidant system of LCPEx-MIONPs exhibited an IC50 value of 202.3 µg/mL, highlighting the synergistic effects of lychee phytochemicals and magnetic ions. Beyond antioxidant capabilities, LCPEx-MIONPs, when incorporated into banana-based food preservation films, demonstrated significant prowess in grape preservation. The controlled release properties led to a notable reduction in water loss (9.3% on day 3 and 19.7% on day 6) compared to control grapes without LCPEx-MIONPs incorporated (18.2% on day 3 and 34.8% on day 6). This study significantly contributes to green nanotechnology, food preservation, and the development of eco-friendly hydrogels and bioplastic films, emphasizing the versatile applications of LCPEx-MIONPs in antioxidants, sustainable food preservation, and hydrogel-based bioplastics.

Fabrication and Characterization of Montmorillonite Clay/Agar-Based Magnetic Composite and Its Biological and Electrical Conductivity Evaluation.

Montmorillonite clay and agar are naturally occurring materials of significant importance in designing biocompatible materials tailored for applications in biotechnology and medicine. The introduction of magnetic properties has the potential to significantly boost their characteristics and expand their applications. In this study, we have successfully synthesized highly intercalated magnetic composites, incorporating magnetic iron oxide nanoparticles (MNPs), montmorillonite clay (MMT), and agar (AG), through a thermo-physicomechanical method. Three samples of MMT-AG with 2, 1.5, and 0.5% MNPs and three sample composites of MNPs-AG with 2, 1, and 0.5% MMT clay are prepared. The synthesized composites were characterized by SEM, XRD, TGA, DTA, and FTIR. SEM analysis revealed a uniform dispersion of MNPs and MMT in the composite. The XRD pattern confirmed the presence of MNPs in the composite site. The TGA and DTA results demonstrated improved thermal stability due to the MNP incorporation. FTIR spectra showed all of the constituents of agar, MNPs, and MMT clay. The swelling ratio was observed to range from 835% to 1739%. The swelling study indicated an increased hydrophobicity with the addition of MNPs to the composite. Antibacterial activities revealed a significant inhibition of Escherichia coli (E. coli) growth by ranging from 10 to 19 nm in the composite. The composite also exhibited a considerable antioxidant action, with IC50 values of 7.96, 46.55, and 57.58 μg/mL, and electrical properties just like conductors.

Highly efficient oxidative degradation of organic dyes by using magnetically recyclable nanocatalyst based on manganese-porphyrin

This study reports the attachment of meso-tetrakis-(4-carboxyphenyl)porphyrinato manganese(III) acetate (Mn(TCPP)OAc) to the surface of amine-functionalized iron oxide magnetic nanoparticle (Fe3O4@SiO2@NH2) by amide bonds. To characterize the structure and morphology of the prepared nanocatalyst (Fe3O4@SiO2@NH2@(Mn(TCPP)OAc)), various techniques such as FT-IR, ultraviolet–visible spectroscopy, flame atomic absorption spectroscopy, X-ray powder diffraction, scanning electron microscopy, vibration sample magnetometry and thermogravimetric analysis were applied. In the following, the catalytic efficiency of the prepared nanocatalyst were also investigated for the oxidative degradation of various organic dyes with hydrogen peroxide (as a green oxidant) in water and the effect of various parameters which may affect the catalytic efficiency were optimized. In addition, the prepared nanocatalyst showed little deactivation with time, was easily recovered by an external magnet, and could be reused at least five times with no significant loss in the activity.

Carboxyethylsilanetriol-Coated Magnetic Nanoparticles as an Ultrasensitive Immunoplatform for Electrochemical Magnetosensing of Cotinine.

In the present study, an innovative and simple electrochemical magneto biosensor based on carboxyethylsilanetriol-modified iron oxide (Fe3O4) magnetic nanoparticles was designed for ultrasensitive and specific analysis of cotinine, an important marker of smoking. Anticotinine antibodies were covalently immobilized on carboxylic acid-modified magnetic nanoparticles, and the cotinine-specific magnetic nanoparticles created a specific surface on the working electrode surface. The use of magnetic nanoparticles as an immobilization platform for antibodies provided a large surface area for antibody attachment and increased sensitivity. In addition, the advantages of the new immobilization platform were reusing the working electrode numerous times, recording repeatable and reproducible signals, and reducing the necessary volume of biomolecules. The specific interaction between cotinine and cotinine-specific antibody-attached magnetic nanoparticles restricted the electron transfer of the redox probe and changed the impedimetric response of the electrode correlated to the concentration of cotinine. The magneto biosensor had a wide detection range (2-300 pg/mL), a low LOD (606 fg/mL), and an acceptable recovery (97.24-105.31%) in real samples. In addition, the current biosensor's measurement results were in good agreement with those found by the standard liquid chromatography (HPLC) and enzyme-linked immunosorbent assay (ELISA) methods. These results showed that a simple impedimetric immunosensing platform was generated for the cotinine analysis.

Effect of reaction and post-treatment conditions on physico-chemical properties of magnetic iron oxide nano-particles

Poor stability and dispersibility, as well as aggregation are considered as major challenges in clinical application of iron oxide nanoparticles (IONPs). Several studies have shown that the synthesis parameters and post-synthesis treatments e.g., drying methods, have the capability to improve the particles' characteristics. Herein, we investigate the combined effect of synthesis and post-treatment parameters on the particle size, stability and magnetism of IONPs. Magnetite (Fe3O4) NPs were prepared via co-precipitation and post-treated using different methods, i.e. (i) freeze dried at –53 °C, 0.133 mbar for 48 h (liquid nitrogen frozen (LFD) and freezer frozen (FFD)), (ii) vacuum oven dried (VOD) at 60 °C for 24 h, and (iii) kept wet colloidal (WET), dispersed in deionized water. The Fe3O4 NPs’ chemical functional groups, size, shape, crystallinity, stability, aggregation, porosity, and magnetic properties were further analysed using different characterisation techniques. Analytical results showed that, while the WET sample had the best stability and significantly less aggregation at different temperatures, amongst post-treated Fe3O4 NPs, LFD sample exhibited the best stability (up to 37 °C), dispersion and smallest polydispersity index. Furthermore, all dried NPs had superparamagnetic characteristics, while, LFD Fe3O4 NPs had better magnetic properties and stability than other drying methods.

Magnetic properties of nano(iron oxide)-decorated graphene oxide

Graphene oxide (GO) decorated with magnetic iron oxide nanoparticles is of great interest due to its potential applications in nanomedicine, electromagnetic insulation, and electro-catalysis. Herein, we studied the effect of the preparation conditions by hydrothermal synthesis on the phase composition of graphene oxide decorated with iron oxide nanoparticles. GO samples using two different amounts of a 2Fe3+/Fe2+ solution were prepared under a pH = 11, whereas hydrazine treatment was done to half the batch. Electron microscopy images show that Fe-oxide nanoparticles with an average size of 5–10 nm appeared decorating graphene platelets. Graphene oxide decorated rolls form in hydrazine-treated samples. Infrared spectra suggest a mixture of iron oxide phases with increased goethite upon hydrazine treatment. X-ray diffraction and X-ray Absorption Near Edge Structure spectroscopy (XANES) in the Fe K-edge determined the relative amount of the resulting iron oxide phases. Mixtures of magnetite, maghemite, hematite, and goethite were observed depending on the sample preparation conditions. The effect of phase composition on the magnetic properties was also studied. The saturation magnetization varied from 3.5 to ca. 50 Am2/kg at 300 K; it is proportional to the magnetite/maghemite content and reduces as the amount of goethite increases. The coercive field in the samples increases up to 1.6–2.4 mT at 300 K. The saturation magnetization has a slower decay with temperature when compared to a reference sample of magnetite nanoparticles, which suggests a magnetoelectric coupling due to the nanoparticle distribution onto the conductive graphene sheet.

Selective Removal of Chlorophyll and Isolation of Lutein from Plant Extracts Using Magnetic Solid Phase Extraction with Iron Oxide Nanoparticles.

In recent years, there has been a growing interest in plant pigments as readily available nutraceuticals. Photosynthetic pigments, specifically chlorophylls and carotenoids, renowned for their non-toxic antioxidant properties, are increasingly finding applications beyond their health-promoting attributes. Consequently, there is an ongoing need for cost-effective methods of isolation. This study employs a co-precipitation method to synthesize magnetic iron oxide nanoparticles. Scanning electron microscopy (SEM) coupled with energy dispersive spectrometry (EDS) confirms that an aqueous environment and oxidizing conditions yield nanosized iron oxide with particle sizes ranging from 80 to 140 nm. X-ray photoelectron spectroscopy (XPS) spectra indicate the presence of hydrous iron oxide FeO(OH) on the surface of the nanosized iron oxide. The Brunauer-Emmett-Teller (BET) surface area of obtained nanomaterial was 151.4 m2 g-1, with total pore volumes of pores 0.25 cm3 g-1 STP. The material, designated as iron oxide nanoparticles (IONPs), serves as an adsorbent for magnetic solid phase extraction (MSPE) and isolation of photosynthetic pigments (chlorophyll a, lutein) from extracts of higher green plants (Mentha piperita L., Urtica dioica L.). Sorption of chlorophyll a onto the nanoparticles is confirmed using UV-vis spectroscopy, Fourier transform infrared photoacoustic spectroscopy (FT-IR/PAS), and high-performance liquid chromatography (HPLC). Selective sorption of chlorophyll a requires a minimum of 3 g of IONPs per 12 mg of chlorophyll a, with acetone as the solvent, and is dependent on a storage time of 48 h. Extended contact time of IONPs with the acetone extract, i.e., 72 h, ensures the elimination of remaining components except lutein, with a spectral purity of 98%, recovered with over 90% efficiency. The mechanism of chlorophyll removal using IONPs relies on the interaction of the pigment's carbonyl (C=O) groups with the adsorbent surface hydroxyl (-OH) groups. Based on molecular dynamics (MD) simulations, it has been proven that the selective adsorption of pigments is also influenced by more favorable dispersion interactions between acetone and chlorophyll in comparison with other solutes. An aqueous environment significantly promotes the removal of pigments; however, it results in a complete loss of selectivity.

The Concept of Using 2D Self-Assembly of Magnetic Nanoparticles for Bioassays

It can be observed that magnetic iron-oxide nanoparticles are increasingly used in bioassay methods. This is due to their stability in aqueous solutions, ease of functionalization, biocompatibility and very low toxicity. Here, we show that the recent discovery of the ability of magnetic nanoparticles to self-assemble into 2D structures of ordered chains may be exploited for bioassays. This would open up the possibility of controlled immobilization of proteins, enzymes, DNA or RNA and other molecular systems on spatially ordered nanostructures. In this work, fluorescein was used as an example. Also shown is the possibility of using Raman spectroscopy to analyze material accumulated on such structures. The observed formation of regularly spaced chains of magnetic nanoparticles takes place during the drying process of a thin layer of magnetic liquid placed on an appropriately prepared low-density polyethylene (LDPE) film.

Magnetic hyperthermia in tissue-like media: Finite element simulation, experimental validation, parametric variations, and calibration studies

We report the experimental characterization and finite element modeling of magnetic fluid hyperthermia (MFH) in tissue-like media using tetramethyl ammonium hydroxide coated superparamagnetic iron oxide magnetic nanoparticles (MNPs) of size ∼19.6 ± 1.2 nm, prepared using a co-precipitation technique. MFH properties are probed for the MNPs in ∼1 wt. % agar, resembling the tumor and surrounding normal tissues. The field-induced temperature rise (ΔT) is experimentally measured in real-time utilizing an infrared camera. A finite element model (FEM) is utilized to simulate the spatiotemporal variations in the thermal profiles, which are found to be in good agreement with the experimental data. FEM-based parametric studies reveal that the thermal conductivity of the medium is the most significant parameter influencing the thermal profiles. The spatiotemporal variations in the thermal profiles are numerically studied for seven different tissues, and the obtained results indicate the highest ΔT for the breast tissue in the tumor and the surrounding regions, which is due to the lowest volumetric specific heat and the highest thermal conductivity of the breast tissue, respectively. Numerical studies on the thermal profiles for sub-surface tumors with parametrically varying depths indicate a strong exponential correlation between the surface and tumor temperature, where the regression coefficients are found to be correlated with the thermo-physical properties of the tissues. The obtained findings are beneficial for developing a simplistic and easily deployable framework for a priori generation of the thermal profiles for various tissues during MFH, which is useful for appropriate planning and parameter selection for MFH-based therapy.